How to Draw a Circle in Corel Painter Essentials 7

Quick links to procedures on this page:

Creating Shapes

You can create shapes in the post-obit means:

•

past using the Pen, Quick Curve, Rectangular Shape, Oval Shape, or Text tool

•

by converting a choice path to a shape

•

by acquiring an Adobe Illustrator file (File carte du jour Acquire)

•

by pasting an Adobe Illustrator object from the Clipboard

As yous create shapes, Corel Painter gives them default attributes for stroke and fill. For instructions on setting the default shape attributes, refer to Shapes Preferences and Setting Shape Attributes.

The shape manipulation tools are in the toolbox. By holding down Control (Mac OS) or Ctrl (Windows), you lot tin can toggle betwixt the Shape Selection tool and any of the shape design and editing tools. Toggling makes it convenient to quickly select a wing handle or anchor point before editing it.

Using Shape Object Tools

You can create shapes past using the Rectangular Shape tool or Oval Shape tool.

Shapes created with the Rectangular Shape tool and Oval Shape tool.

To create a rectangle or an oval

one

Choose the Rectangular Shape tool or the Oval Shape tool in the toolbox.

two

On the property bar, set whatsoever of the following attributes:

•

Stroke check box — when enabled, lets y'all create a shape with a stroke, or an outline

•

Stroke Color pop-up menu — lets you lot choose a stroke color if the Stroke check box is enabled

•

Fill check box — when enabled, lets you lot create a shape with a make full

•

Fill Color popular-upward carte — lets you lot choose a color for the fill if the Fill cheque box is enabled

3

Drag in the document window.

If you want to create a perfect foursquare or circle, hold downwards Shift while you lot elevate.

The belongings bar and the Navigator panel display information about the shape. To display the Navigator panel, cull Window Navigator.

Using the Pen Tool

The Pen tool lets you use B�zier lines to create shapes. You can use the Pen tool to depict straight lines or smoothen, flowing curves, and you can create shapes containing any combination of directly and curved lines.

You tin can hands adapt shapes later on yous create them. For more than information, refer to Editing Shapes. You can as well catechumen between smoothen and corner points. For more information, refer to Adjusting Curvature.

Clicking creates anchor points connected by straight line segments.

Dragging curves the segments between points.

To describe a Pen tool shape

1

Choose the Pen tool in the toolbox.

2

In the document window, click where you want to begin.

3

Do one of the following:

•

To make a straight line segment, click where yous want to end the segment. Corel Painter draws a straight line between the two anchor points.

Shapes created with straight line segments.

•

To make a curved line segment, drag to create a new anchor indicate and wing. The angle and length of the wing determine the curvature of the path. The further yous elevate, the longer the wing and the deeper the curve.

Shapes created with curved line segments.

4

Echo stride 3 as often equally necessary, combining straight and curved segments until y'all have the shape yous want.

five

Finish the shape by doing one of the post-obit:

•

Close the shape past clicking or dragging the offset ballast point.

•

Close the shape past clicking the Shut Shape button on the property bar.

•

Hold down Command (Mac Os) or Ctrl (Windows) to temporarily access the Shape Selection tool , and click outside the shape to deselect it.

You can constrain the placement of the points by snapping to the grid. For data about displaying and snapping to the grid, refer to Using the Filigree.

Each click or drag adds to the path. If you unintentionally add to the path, press Delete (Mac Bone) or Backspace (Windows) to remove the terminal anchor point.

To add to an open shape path

1

Click an endpoint with the Pen tool .

ii

Click or drag where yous desire to add together an anchor point.

You can add to a path from an endpoint but. You lot cannot add to a closed path, or to the centre of an open path.

Y'all can likewise select an endpoint by holding down Command (Mac Os) or Ctrl (Windows) and clicking the endpoint or dragging a marquee over it.

Using the Quick Curve Tool

The Quick Curve tool allows you lot to create B�zier curves by cartoon freehand lines, as if you lot were drawing with a pen or pencil.

To draw a freehand shape

1

Choose the Quick Bend tool in the toolbox.

2

Click where yous desire to first the shape or line, and drag.

As you drag, a dotted line appears. When y'all end dragging, the Quick Curve shape appears.

If you desire to close the shape, finish at the same bespeak where y'all began.

Yous tin can add to either endpoint of a Quick Curve shape by selecting the endpoint and dragging out from it. To select an endpoint, hold down Command (Mac Os) or Ctrl (Windows), and click the endpoint or drag over it.

Draw freehand shapes with the Quick Curve tool.

Converting Selections to Shapes

Converting a selection to a shape enables you lot to edit the contour past using the Shape Edit tools. When you are satisfied with the contour, y'all can convert the shape outline back to a option. For more information, refer to To catechumen a shape to a option.

If y'all are simply scaling, rotating, or skewing a choice path, employ the Selection Adjuster tool. If you must edit the contour of the curve, convert the selection to a shape.

Working from a selection path also lets you create shapes based on regions of the epitome. For case, if yous used the Magic Wand tool to select a region of common colour, you could convert the Magic Wand option path to a shape. When the selection is pixel-based, Corel Painter may create multiple shapes.

You can convert a selection to a shape.

To convert a selection to a shape

1

Practice one of the post-obit:

•

Create a choice in the prototype.

•

Double-click a selection in the Selection Portfolio console to add together information technology to the document window.

2

Choose Select menu Convert To Shape.

Corel Painter converts the selection to a shape, giving information technology the default shape attributes. The new shape appears in the Layers console.

For all-time results, the choice should be path-based. If the selection is pixel-based, from the carte bar choose Select Transform Selection to convert information technology to a path-based selection.

Acquiring Shapes from Adobe Illustrator

Corel Painter lets you lot piece of work with shapes that were created in Adobe Illustrator and saved to the AI format (version iii or earlier).

Adobe Illustrator layers are supported in Corel Painter, merely several Adobe Illustrator shape elements, such as patterns, placed images, gradients, masks, and text are not supported. If the file includes text, you must convert text to outlines when saving the file.

If both Corel Painter and Adobe Illustrator are running on your figurer, you tin can copy content from Adobe Illustrator and paste it in Corel Painter.

To larn shapes from Adobe Illustrator

1

Before acquiring the shape in Corel Painter, you demand to ensure that the AI file was saved as Adobe Illustrator version iii or earlier.

two

In Corel Painter, cull File card Larn Adobe Illustrator File.

three

In the Adobe Illustrator File dialog box, select the Adobe Illustrator file, and click Open.

To convert text in Adobe Illustrator

1

In Adobe Illustrator, select the text using a choice tool.

ii

Choose Type carte Create Outlines.

Setting Shape Attributes

When you lot apply a stroke, besides known as an outline, to a shape, y'all can choose the color, opacity, and width of the path outlining the shape. You can likewise control the way line ends are fatigued and joined. In addition, you lot can utilise a fill to a shape past coloring the area enclosed past the stroke. When yous fill up a shape, you can cull the color and opacity of the fill.

Stroke and fill attributes apply to both open and closed shapes. Before filling an open shape, Corel Painter closes the shape past connecting the endpoints with a straight line.

The Flatness attribute controls how many straight lines the program uses to approximate a curve when press. PostScript output devices create curved lines by linking a series of brusk, straight lines that progress in angle. The smaller the flatness setting, the greater the number of directly lines, and the more accurate the curve.

You can also change the default shape attributes. For more information, refer to Shapes Preferences. In improver, you can pigment a shape after the shape has been committed to a pixel-based image layer.

To set up shape stroke attributes

one

With the Shape Option tool , click a shape whose stroke attributes you want to alter, and press Render (Mac OS) or Enter (Windows).

Yous can select multiple shapes by holding downward Shift while clicking the shapes.

2

In the Ready Shape Attributes dialog box, enable the Stroke check box to utilize an outline to the selected shape.

To remove the stroke, disable the bank check box.

3

Double-click the flake, choose a color from the Color dialog box, and click OK.

iv

Adjust the Opacity and Width sliders to control the opacity and width of the stroke.

v

Click 1 of the post-obit Line Cap icons to control the endpoints of open shapes.

6

Click one of the following Line Join icons to determine how corners are created when two segments run into.

7

Adjust the Miter Limit slider.

When lines are joined at a sharp angle, a abrupt corner is created. You lot tin fix the miter limit to smooth out the sharpness.

8

Click Set New Shape Attributes.

When you select a shape with the Shape Selection tool, you lot can also specify the following attributes past using the buttons on the property bar:

•

Toggle Stroke Colour

•

Toggle Fill Color

To set shape fill up attributes

1

With the Shape Choice tool , click a shape whose fill attributes you want to change, and press Render (Mac Os) or Enter (Windows).

You tin can select multiple shapes past holding down Shift while clicking the shapes.

two

In the Set Shape Attributes dialog box, enable the Fill check box to utilize a stroke to the selected shape.

To remove the fill, disable the check box.

3

Double-click the bit, choose a color from the Colour dialog box, and click OK.

iv

Adjust the Opacity slider to control the opacity of the fill up.

5

Click one of the following icons:

•

Make full Overlaps to fill overlapping areas of multiple shapes.

•

Don't Fill Overlaps to leave overlapping areas unfilled. Multiple overlaps alternate between filled and non filled.

6

Click Fix New Shape Attributes.

You can likewise specify some fill and fill up color attributes on the property bar when you select a shape with the Layer Adjuster tool or the Shape Selection tool.

You can also employ the Edit carte du jour Make full command or the Pigment Bucket tool to fill a shape. Because these methods apply pixel information to the region, Corel Painter offset converts the shape to a pixel-based layer. For more than information, refer to Working with Color Fills.

To ready shape flatness

1

With the Shape Selection tool , click a shape whose flatness y'all want to change, and press Render (Mac Os) or Enter (Windows).

Yous can select multiple shapes by holding down Shift while clicking the shapes.

2

In the Set Shape Attributes dialog box, conform the Flatness slider.

3

Click Set New Shape Attributes.

Usually, it is not necessary to change the flatness setting. You lot may want to modify it to arrange for a particular high resolution printer or to avoid a PostScript limitcheck error. Bank check with your output service to detect out if they accept a recommended flatness setting.

A alter in flatness appears only in your output, not on your screen.

Setting preferences for drawing shapes

If you want to modify the default appearance of the shapes that y'all draw, you lot tin can change the shape preferences. When y'all change a preference, the new preference is applied to all the new shapes that y'all depict. If you want to clearly distinguish a shape that'southward in the procedure of being fatigued from a shape whose paths are closed, y'all can specify preferences for each state. You lot tin can too modify the appearance of Bezier handles and various elements such as outlines and wings, to make it easier for drawing.

To ready preferences for drawing shapes

ane

Do one of the following:

•

(Mac OS) Choose Corel Painter 12 Preferences Shapes.

•

(Windows) Choose Edit Preferences Shapes.

2

Perform a chore from the post-obit table.

Shape Preferences	Description
On Draw - Make full with current color	Fills the shape with the currently selected Principal colour when cartoon.
On Depict - Stroke in current colour	Outlines the shapes with the currently selected Master color when drawing.
On Close - Fill with current color	Fills the shape with the currently selected Main color one time the shape paths are airtight
On Close - Stroke in current colour	Outlines the shapes with the currently selected Main color once the shape paths are closed.
Big Handles	Controls the size of the ballast points and the direction of the wing handles. This can make them easier to catch and elevate. If you want large points, enable this choice.
Colors - Wing/Bezier/Handle	Sets the color of the wings, Bezier, and handles.
Colors - Outline/Path	Sets the color of the shape outline paths.
Colors - Selected Point/Ballast	Sets the color of the selected anchor points. The unselected anchor points announced "hollow."
Align with hidden shape	Aligns a brushstroke with a subconscious shape or path.
Tolerance	Determines how close the brushstroke must exist, in pixels, to the path or shape for automated alignment to occur.

---

---

Copyright 2012 Corel Corporation. All rights reserved.

holmeswonean56.blogspot.com

Source: http://product.corel.com/help/Painter/540235477/707000/EN/Doc/Creating_Shapes.html#:~:text=Using%20Shape%20Object%20Tools&text=Choose%20the%20Rectangular%20Shape%20tool,Shape%20tool%20in%20the%20toolbox.&text=Drag%20in%20the%20document%20window,down%20Shift%20while%20you%20drag.

Share this post